Cooktop repair in Winnipeg usually costs $150 to $320 for a dead element, a burner that will not light, or a switch that sticks on high, and $250 to $450 when a touch-control or induction board has failed. We fix built-in cooktops and the tops of ranges, electric coil, smooth glass, induction and gas, usually same-day or next-day, and you hear the price before anything comes apart. If the oven below is the problem, see oven and stove repair Winnipeg.
Need it today? Call
(431) 441-3572We book a real arrival window across Winnipeg, diagnose the fault, and quote a firm price before any work.
- Same-day & next-day service
- Firm price before any work
- Service call credited to the repair
- All major brands, one-visit repairs
Winnipeg & surrounding area
Book a repair
Tell us what’s broken and we’ll come back the same business day with a time and a price.
Which cooktop do you have?
The word cooktop covers five different machines, and the repair depends entirely on which one is in your kitchen.
Electric coil. Plug-in coil elements sitting in drip bowls. The simplest and cheapest cooktop to fix.
Smooth glass (radiant). A ceramic-glass surface over ribbon elements that glow red. Every major brand has sold them on ranges and built-ins for decades.
Induction. Also a glass surface, but the glass stays cool and the pan itself is heated by a magnetic field from coils and a power board underneath. Mostly electronics, and a different diagnosis entirely.
Gas. Sealed burners with spark igniters, on steel or on glass. In Winnipeg these run on natural gas from Manitoba Hydro's system; out at cottages and on rural lots around the city, propane.
Downdraft. A cooktop with a vent fan built into the surface or rising behind it, which pulls smoke down through ducting under the floor or out a wall. The fan and its motor are a second appliance in the same cutout.
Built-in cooktops sit in a cutout in the counter, separate from a wall oven, with their own electrical feed or gas line. Range tops are the top of a stove. We repair both, and the faults are the same.
Electric coil cooktop repair
When one coil will not heat, swap it with a working coil of the same size. If the dead coil heats in the other spot, the element is fine and the receptacle or the switch behind the knob is the fault. If it stays dead, it is the element. A receptacle that has scorched or melted is usually the result of a loose element arcing over months, and we replace both together so it does not happen again. Coil repairs are the cheapest cooktop work we do.
Glass cooktop repair: elements, switches and cracks
On a smooth glass top, three parts do most of the failing:
- The radiant element. It may not glow at all, or glow only on part of the ring. Elements can be replaced from below without changing the glass.
- The infinite switch. The switch behind each knob cycles the element on and off to hold a setting. When it sticks, the element glows full on at every setting, or will not come on at all. An element stuck on high is a switch, not the element.
- The hot-surface light and limiter. A limiter inside each element stops the glass from overheating. When it fails the element cycles off too early and the pot never reaches a boil.
A cracked glass top is a different conversation. The glass cannot be patched, so it is replaced as a panel, and on many models the panel comes with its elements already fitted. The price varies more by brand and size than any other cooktop part, so we quote it once we have the model number. Stop using a cracked top in the meantime: spills can run through the crack onto the wiring.
Induction cooktop repair
Before booking an induction repair, try the magnet test. Induction only heats cookware a magnet will stick to, and a flashing zone or a no-pan symbol is very often a pan that is too small, not flat, or not magnetic enough. If a known good cast-iron pan still will not heat, the cooktop has a real fault.
Real induction faults are mostly electronic. The cooling fan under the glass can fail, and the cooktop then shuts zones off to protect itself, often with a code. A power board can fail and take out one or two zones together. The touch control can stop responding, or respond only to some keys. Codes differ between Bosch, Samsung, LG, Frigidaire, GE and Whirlpool, so read us the exact code when you call. Board repairs sit in the $250 to $450 range.
Gas cooktop repair
- Clicks but will not light. Usually a wet igniter after a boil-over, or a burner cap sitting crooked so the gas cannot reach the spark. Dry it, seat the cap, try again. If one burner still will not light, the igniter or its wire has failed.
- Keeps clicking after the burner lights, or clicks with the knob off. Moisture inside a spark switch, often after cleaning around the knobs, or a failing spark module. A switch that stays wet will not dry out by itself under the panel.
- Weak, yellow or uneven flame. Burner ports clogged by spills, or the wrong orifices for the fuel. A cooktop moved from a propane cottage to a natural gas house in the city, or the other way, has to be converted, and that is gas work for a licensed gas fitter.
- Gas smell. Turn the knobs off, do not touch light switches, leave the house and call Manitoba Hydro's gas emergency line from outside. That call comes before ours.
Cooktop repair costs in Winnipeg
Cooktops are priced from the same parts-and-labour ranges as every stove and range we fix in Winnipeg. You get a firm figure before work starts.
| Cooktop repair | Typical range |
|---|---|
| Coil element / receptacle | $150 to $300 |
| Radiant element or infinite switch (glass top) | $150 to $300 |
| Gas burner switch / igniter / spark module | $150 to $320 |
| Touch control or induction power board | $250 to $450 |
| Cracked glass top | quoted by model |
The diagnostic call is typically $90 to $130 and is credited to the repair when you go ahead. Every appliance is priced on the appliance repair cost page.
Repair or replace a built-in cooktop?
Repair, more often than people expect, and the reason is the countertop. A built-in cooktop sits in a cutout sized for that model. A new cooktop may not match the opening, and a cutout that is too big means a new counter, while one that is too small means cutting stone or quartz. Keeping the existing cooktop running avoids all of that, so an element, a switch, an igniter or even a control board is usually worth it. A cracked glass top on an older cooktop is the one we weigh carefully, because the panel can cost close to a new unit. We give you that comparison before you spend anything, and since we do not sell cooktops, we have nothing to gain either way.
Before you call
- Check the breaker. A built-in electric cooktop has its own double breaker, and a half-tripped one can leave some elements dead and others working.
- Swap a dead coil with a working one to see whether the coil or the socket is the problem.
- Do the magnet test on induction cookware.
- On gas, make sure the burner caps are seated and the igniters are dry.
- Find the model number. On built-ins it is often on a plate under the cooktop, visible from inside the cabinet below, or on the underside of the burner box.
Cooktop brands we repair
Frigidaire, GE, Whirlpool, KitchenAid, Samsung, LG, Bosch, Electrolux, Maytag, Kenmore and more, built-in and range-top. Anything else in the kitchen: appliance repair Winnipeg.
Questions we get asked
How much does cooktop repair cost in Winnipeg?
Most cooktop repairs run $150 to $320: an element, a switch, an igniter or a spark module. A touch control or induction power board is $250 to $450, and a cracked glass top is quoted by model. The $90 to $130 diagnostic call comes off the bill when you go ahead.
Can a cracked glass cooktop be repaired?
Not the glass itself. A cracked top is replaced as a panel, often with the elements already attached, and priced once we know the model. Stop using it until then, because spills can reach the wiring through the crack.
Why is one element on my glass cooktop stuck on high?
The infinite switch behind that knob has failed closed, so it sends full power at every setting. Replacing the switch fixes it, and the element itself is usually fine.
Why does my induction cooktop not detect the pan?
Most often the pan. Induction needs magnetic cookware with a flat base that covers enough of the zone. If a magnet sticks firmly to the bottom and the zone still will not heat, the cooktop has a fault, usually a board or the cooling fan.
Why does my gas cooktop keep clicking?
Moisture in a spark switch, usually after a spill or cleaning near the knobs, or a failing spark module. If it clicks with every knob off, unplug the cooktop or switch off its breaker and call.
Do you repair built-in and downdraft cooktops?
Yes. Built-in electric, induction and gas cooktops, and downdraft units including the vent fan, are all part of the same service.
Reviewed October 2026.
Need it today? Call
(431) 441-3572We book a real arrival window across Winnipeg, diagnose the fault, and quote a firm price before any work.
- Same-day & next-day service
- Firm price before any work
- Service call credited to the repair
- All major brands, one-visit repairs
Winnipeg & surrounding area
Book a repair
Tell us what’s broken and we’ll come back the same business day with a time and a price.