Washer and dryer repair in Winnipeg usually costs $150 to $350 per machine, and when both are acting up, one technician looks at the pair on one visit with a single diagnostic call. A washer tub bearing can reach $500 and a dryer motor about $400, and those two are where we talk about replacing. Side-by-side pairs, stacked sets, laundry centres and compact condo units, gas and electric, all major brands, and you hear the price for each machine before anything is opened. Single-machine detail lives on washer repair Winnipeg and dryer repair Winnipeg, with the dryer side priced fault by fault on dryer repair cost Winnipeg, and a slow dry with good heat is often the vent: see dryer vent cleaning Winnipeg.
Need it today? Call
(431) 441-3572We book a real arrival window across Winnipeg, diagnose the fault, and quote a firm price before any work.
- Same-day & next-day service
- Firm price before any work
- Service call credited to the repair
- All major brands, one-visit repairs
Winnipeg & surrounding area
Book a repair
Tell us what’s broken and we’ll come back the same business day with a time and a price.
One visit, one service call, two separate quotes
When you book, tell us both machines are misbehaving and what each one is doing. One technician comes out, diagnoses the washer and the dryer, and gives you a firm price for each repair separately. You can approve both, one, or neither. The $90 to $130 diagnostic call is charged once for the visit and comes off the bill when you go ahead with either repair.
That matters more than it sounds, because laundry faults often travel in pairs, and the second machine is sometimes the real culprit.
Washer, dryer or vent? Sort it out in two minutes
Most laundry calls can be pointed at the right machine before anyone books. Match what you see to the row, do the free check, and you will know whether this is a washer repair, a dryer repair, both, or neither.
| What you notice | Usually the problem | Check before you book |
|---|---|---|
| Clothes drip after the spin, and the dryer needs two cycles | Washer: drain pump, belt or door lock | Lift a load out after the spin; on a front-loader, clear the pump filter behind the small lower panel |
| Clothes are only damp after a full dry cycle | Dryer venting, not the dryer | Go outside while it runs and watch the hood flap open |
| Dryer tumbles but blows cold | Dryer: thermal fuse, element, or a gas igniter | An electric dryer runs on a double breaker; if one half trips, the drum can still turn with no heat |
| Both machines dead at the same moment | Power, not two failures | The breaker, and on a laundry centre the single power cord |
| Washer will not fill during a cold snap | A frozen supply line | Warm the room and the pipes before calling anyone |
| Hard thumping during the spin | Washer: an uneven load, worn suspension, or a bearing on an older machine | Spread the load out and check that all four feet sit flat |
| Burning smell from the dryer | Lint near the heater, or a failing motor | Stop, unplug it and leave it off; that is a fire risk, not a wait-and-see |
If the table points at one machine, the single-machine guides go deeper: washer repair Winnipeg for spin, drain and leak faults, and dryer repair Winnipeg for heat and drum faults. If it points at both, or you cannot tell, book the pair.
When the washer is the reason the dryer seems broken
The most common "both machines are failing" call we get is really one fault. A washer that is not spinning fast enough leaves clothes heavy with water. The dryer then needs two or three cycles to finish a load, so it looks like a dryer with no heat or a blocked vent. Lift a load out of the washer after the spin: if it drips, or feels much heavier than usual, the washer's drain pump, belt or door lock is the repair, and the dryer is fine.
It works the other way too. A dryer that runs hot because its vent is blocked can scorch the rubber and plastic on a stacked washer sitting right below it. We check the pair as a system for exactly this reason.
Stacked sets, laundry centres and all-in-one combos
Stacked pair. A separate front-load washer and dryer joined by a stacking kit. Each machine is its own appliance, but the dryer usually has to come down before anyone can work on the washer's top or back, which is a two-person lift we plan for when we book.
Laundry centre. One appliance with a top-load washer below and a dryer above, in a single cabinet: Whirlpool, GE, Frigidaire and Maytag all make them, and they turn up in a lot of Winnipeg condos, townhouses and basement suites. There is one power cord, so a power fault takes out both halves at once. Many repairs on either half are done with the unit pulled out from the wall, from the front and back panels.
Compact 24-inch pairs. Narrow European-style machines from Bosch, Electrolux, Blomberg, Miele and others, common in condos and apartments. Many of the dryers are ventless condenser models, with a second lint filter and a condenser that has to be cleaned to keep drying times short.
All-in-one washer-dryer combos. One drum that washes and then dries, ventless. Long dry times are normal by design, but a combo that never finishes drying usually has a clogged condenser path or a failed fan or heater.
Winnipeg winters and laundry rooms
Laundry in Winnipeg mostly lives in basements, and a few cold-weather problems come up every year:
- A frozen dryer vent hood. Dryer exhaust is warm and wet, and at -25°C the moisture freezes on the outside flap until it barely opens. Snow drifting against a low wall vent does the same. The dryer runs hot, takes forever, and can blow its thermal fuse. Clear the hood from outside before you book a no-heat call.
- Frozen supply lines. A washer on an outside wall, with pipes running through it, can lose its water supply in a deep cold snap. The washer shows a no-fill code, and it is not a broken inlet valve. Warm the room and the pipes, and if a pipe has burst, that is a plumber first.
- Cold fill water. The cold supply coming into a Winnipeg house in January is close to freezing, so powder detergent can clump in the dispenser and leave residue on clothes. Liquid or pods dissolve better on cold cycles.
- Basement humidity in summer. Front-load door seals grow mildew fastest in a damp basement. Leave the door and the dispenser drawer open between loads.
Booking laundry machine repair near you in Winnipeg
Most washer and dryer calls across Winnipeg are booked same-day or next-day, from Transcona and the Kildonans to St. James, Fort Garry and Charleswood, with a real arrival window rather than a whole day at home. Three things make that first visit the one that finishes the job:
- Both model numbers. On a top-load washer the label is usually under the lid or on the back of the control panel; on a front-loader it is around the door opening. A dryer usually has it inside the door frame or on the back panel. A photo of each label by text or email is perfect.
- Gas or electric. For the dryer this decides which parts ride along. A gas pipe or flexible gas connector running into the back means gas; an electric dryer has a large 240-volt plug and no gas pipe.
- How we get to them. Basement stairs, a laundry closet in a condo, or a stacked set that has to come apart. A clear path to the machines keeps the visit short, and a stacked set tells us to plan for two people.
Washer and dryer repair costs in Winnipeg
Typical Winnipeg parts-and-labour ranges, one firm figure per machine before work starts.
| Washer repair | Typical range |
|---|---|
| Drain pump | $180 to $350 |
| Drive belt / motor coupler | $150 to $300 |
| Lid switch / door lock | $150 to $300 |
| Water inlet valve | $160 to $320 |
| Door boot seal (front-load) | $200 to $400 |
| Tub bearing | $350 to $500 (often the replace line) |
| Dryer repair | Typical range |
|---|---|
| Thermal fuse / thermostat | $150 to $280 |
| Heating element (electric) | $180 to $350 |
| Igniter / gas valve coils (gas) | $180 to $350 |
| Drive belt | $150 to $250 |
| Drum rollers / idler pulley | $180 to $320 |
One diagnostic call, typically $90 to $130, covers both machines and is credited when you go ahead. The full list is on the appliance repair cost page.
Do you have to replace both if one dies?
No, and we will not push you to. Washers and dryers both last about 8 to 12 years, but they wear differently: a dryer is mechanically simpler and often outlives the washer it was bought with. Three things to weigh before buying a matching pair:
- Is the survivor healthy? If the dryer is heating, tumbling and drying a load in one cycle, there is no reason to retire it.
- Stacked units. A new washer of a different brand or generation may not accept your old dryer's stacking kit. Check that before you buy, or the repair on the washer becomes the cheaper option by a wide margin.
- Laundry centres. Because it is one appliance, a major failure on one half (a washer bearing, a dryer motor) on an older unit usually means replacing the whole thing, and that is the one case where we will raise it first.
The repair-or-replace calculator runs the numbers for each machine separately.
Brands we repair in pairs
Samsung, LG, Whirlpool, Maytag, GE, Frigidaire, Electrolux, Bosch, Kenmore and more. Samsung front-loaders have their own code list, covered on Samsung washer repair Winnipeg.
Questions we get asked
How much does washer and dryer repair cost in Winnipeg?
Most repairs run $150 to $350 per machine in parts and labour, up to $500 for a washer tub bearing and about $400 for a dryer motor. One $90 to $130 diagnostic call covers both machines and is credited when you go ahead.
Can you fix my washer and dryer on the same visit?
Yes. Tell us about both when you book and one technician checks the pair, with a single diagnostic call. Each repair gets its own price, so you can approve one, both or neither.
Do you repair stackable washer dryers and laundry centres?
Yes: stacked front-load pairs, one-piece laundry centres, compact 24-inch condo units and all-in-one washer-dryer combos, gas and electric.
Why does my dryer take forever when it seems to heat fine?
Check the washer first. If clothes come out of the spin dripping or unusually heavy, the washer is not spinning hard enough, and the dryer is simply drying wetter loads. If the clothes are only damp, look at the dryer vent, which in a Winnipeg winter is often a frozen outside hood.
My dryer vent is frozen shut. What should I do?
Stop running the dryer, then clear the ice and snow from the outside hood so the flap swings freely. Clean the lint screen and run a short cycle while someone watches the flap open. If the thermal fuse blew while the vent was blocked, the dryer will tumble with no heat, and that is a quick repair.
Can I get washer and dryer repair near me in Winnipeg the same day?
Usually, yes. Most calls across the city are booked same-day or next-day with an arrival window. Call in the morning with both model numbers and there is a good chance the technician is there that afternoon.
What does washing machine repair cost in Winnipeg?
Most washer repairs run $150 to $350 in parts and labour, a tub bearing $350 to $500. The washing machine repair cost page breaks it down by part and by symptom.
Should I replace both machines if one breaks?
Usually not. If the other machine works well, keep it. The exceptions are a one-piece laundry centre with a major failure, and a stacked set where a new washer will not fit your old dryer's stacking kit.
Reviewed October 2026.
Need it today? Call
(431) 441-3572We book a real arrival window across Winnipeg, diagnose the fault, and quote a firm price before any work.
- Same-day & next-day service
- Firm price before any work
- Service call credited to the repair
- All major brands, one-visit repairs
Winnipeg & surrounding area
Book a repair
Tell us what’s broken and we’ll come back the same business day with a time and a price.