Home / Dishwasher Repair in Winnipeg

Dishwasher Repair in Winnipeg

Reviewed October 2026 · Winnipeg, Manitoba

$150 to $400typical repair, quoted first
Same-daymost Winnipeg calls
Best fornot draining, not cleaning, leaking

Dishwasher repair in Winnipeg typically costs $150 to $400 in parts and labour, with drain pumps, valves and latches at the low end and control boards at the top. Standing water or dirty dishes are easy to live with badly for weeks, but most fixes are quick: same-day or next-day across Winnipeg, all major brands, price quoted before any work. KitchenAid owners will find filters, ProDry and F9E1 on KitchenAid dishwasher repair Winnipeg. Bosch owners will find E15, E24 and E25 explained on Bosch dishwasher repair Winnipeg, LG owners the OE, IE and LE codes on LG dishwasher repair Winnipeg, Samsung owners the LC, 5C and 4C codes on Samsung dishwasher repair Winnipeg, Frigidaire owners i20, i40 and CL on Frigidaire dishwasher repair Winnipeg, and Whirlpool owners the blinking Clean light and F9E1 on Whirlpool dishwasher repair Winnipeg.

(431) 441-3572

Need it today? Call

(431) 441-3572

We book a real arrival window across Winnipeg, diagnose the fault, and quote a firm price before any work.

  • Same-day & next-day service
  • Firm price before any work
  • Service call credited to the repair
  • All major brands, one-visit repairs
Call (431) 441-3572

Winnipeg & surrounding area

Book a repair

Tell us what’s broken and we’ll come back the same business day with a time and a price.

No obligation. The price is quoted before any work. Your details go only to our Winnipeg team.

Common dishwasher problems we fix

  • Water standing in the bottom, will not drain. A clogged filter or drain hose, a blocked garburator port, or a failed drain pump. Often the cheapest and most common dishwasher repair. The six checks to try first, how to tell a dishwasher fault from a blocked sink drain, and the cost by cause are on the dishwasher not draining page.
  • Dishes come out dirty. A clogged spray arm, a failed circulation pump, a worn wash-arm bearing, or scale on the heating element and jets, which Winnipeg's moderately hard water builds up over years.
  • Leaking onto the floor. A worn door gasket, a cracked hose, a loose valve, or a failed door latch letting water past the seal.
  • Will not start or fill. A door latch switch, a water inlet valve, or a control board.
  • Not drying. A failed heating element or vent, or a rinse-aid dispenser not dispensing.
  • Noisy, grinding. Something in the pump, or a failing wash motor bearing.
  • Buttons or cycle not responding. Touchpad or control board.

What dishwasher repair costs in Winnipeg

What dishwasher jobs generally come to in Winnipeg, parts and labour together. Your own number is settled before the work.

Repair Typical range
Drain pump $180 to $350
Water inlet valve $160 to $300
Door latch / switch $150 to $280
Door gasket / seal $150 to $280
Circulation / wash pump $220 to $400
Control board / touchpad $200 to $400

Diagnostic service call typically $90 to $130, credited toward the repair when you proceed. See the cost page.

Repair or replace a dishwasher?

Dishwashers last about 8 to 10 years. Inside that window most failures, drain pumps, valves, latches, gaskets, are worth repairing. The tip toward replacement comes when an older unit needs a control board or a circulation pump at $220 to $400, which can approach half the price of a new mid-range dishwasher. We give you that comparison before you decide.

Winnipeg's water is moderately hard, and dishwashers show it first

The City publishes Shoal Lake hardness at roughly 70 to 87 mg/L, moderately hard rather than hard, but that is still enough to leave scale on heating elements, spray jets and valves over years of use, which is why "dishes not getting clean" is such a common call here. Sometimes the fix is a part; sometimes it is descaling and clearing the jets plus a rinse-aid adjustment. We will do the cheaper thing first when the cheaper thing solves it.

When the dishwasher will not drain

Standing water is one of the most common dishwasher complaints, and a good share of cases are solved by cleaning the filter before anyone needs to visit. If that does not clear it, the cause is further down the line: the drain hose, the garburator connection, an air gap, or the drain pump itself. Our dishwasher not draining guide walks through each check in order, with what each repair costs if it comes to that.

Is a dishwasher worth repairing?

Usually, when it is under about 8 years old. A comparable new dishwasher is around $800 before delivery, removal and installation, while a drain pump, inlet valve, latch or gasket runs $150 to $350. It gets closer when an older machine needs a control board or circulation pump at $220 to $400. Leaks are normally at the cheap end: a door gasket, latch or hose in the $150 to $300 range, with the pump seal the pricier exception.

Plumber or appliance technician?

It depends where the fault is. A plumber is the right call for the house side: the shut-off valve under the sink, the supply line, a blocked sink drain or garburator, or a leak from the plumbing behind the cabinet. An appliance technician is the right call for anything inside the machine: the drain pump, the inlet valve, the door latch, the heating element, the circulation pump and the control board. If the sink also drains slowly, start with the plumbing. If the sink is fine and the dishwasher still holds water or will not fill, the fault is in the dishwasher. The dishwasher not draining guide shows how to tell the two apart in a few minutes.

Maintenance that saves a repair call

  • Monthly: twist out the filter, rinse it under the tap and scrub the mesh with a soft brush. Most drain and cleaning complaints start here.
  • Every few months: run an empty hot cycle with a dishwasher cleaner or citric acid to clear the light scale Winnipeg's water leaves on the element and jets.
  • Keep the rinse aid topped up. It does more for spotting and drying than any setting.
  • Run the kitchen tap hot before starting a cycle, so the first fill is hot rather than cold water that sat in the pipe.
  • Check the door gasket for food and grit stuck to it, which is how small leaks start.

Do this before you call

  • Pull the bottom rack and clean the filter (twist-out cylinder in the floor of the tub). A clogged filter alone causes both poor cleaning and slow draining.
  • Run the garburator if the drain connects through it; a blocked port stops the dishwasher draining.
  • Check the spray arms spin freely and the holes are not scaled shut.
  • Note whether it is a drain, clean, leak or no-start problem; each points to different parts.

Brands we repair

Bosch, Samsung, LG, Whirlpool, Maytag, KitchenAid, GE, Frigidaire, Kenmore and more. Bosch and KitchenAid dishwashers are well worth repairing given their build quality; we carry common parts. For other appliances, go to appliance repair Winnipeg.

Frequently asked questions

How much does it cost to fix a leaking dishwasher in Winnipeg?

Usually $150 to $300, because most leaks come from the door gasket, the latch, a hose or a valve connection. A leak from the pump seal under the tub costs more, up to about $400, since the pump is part of the job.

What causes water to sit in the bottom of the dishwasher?

A clogged filter or drain hose, a blocked garburator port, or a failed drain pump. Clean the filter first; if it still holds water, it is usually the pump, which is a common and affordable repair.

Why aren't my dishes getting clean?

Clogged spray arms, a weak circulation pump, or scale on the jets and element, which Winnipeg's moderately hard water builds up over time. Often it is cleaning and descaling rather than a part, and we start with the cheaper fix.

How much does dishwasher repair cost in Winnipeg?

Most dishwasher repairs run $150 to $400. Drain pumps and valves are at the lower end; control boards and circulation pumps are at the top and can push an older unit toward replacement.

Is a Bosch dishwasher worth repairing?

Usually yes. Bosch and KitchenAid units are built to last and the common failures are repairable well below the cost of replacing a comparable machine.

Is it hard to fix a dishwasher yourself?

Cleaning the filter, clearing spray arms and checking the drain hose for a kink are easy and solve plenty of problems. Replacing a pump, valve or board means disconnecting water and power and working in a tight space under the counter, which is where a technician earns the call-out fee.

Can a plumber fix a dishwasher?

A plumber handles the supply line, the shut-off valve and the sink drain or garburator. Faults inside the dishwasher, such as the pump, inlet valve, latch, element or control board, are appliance repairs. If only the dishwasher is affected and the sink drains normally, call an appliance technician.

How quickly can you get here?

Most Winnipeg dishwasher calls are booked same-day or next-day, with an arrival window rather than an all-day wait.

Reviewed October 2026.

(431) 441-3572

Need it today? Call

(431) 441-3572

We book a real arrival window across Winnipeg, diagnose the fault, and quote a firm price before any work.

  • Same-day & next-day service
  • Firm price before any work
  • Service call credited to the repair
  • All major brands, one-visit repairs
Call (431) 441-3572

Winnipeg & surrounding area

Book a repair

Tell us what’s broken and we’ll come back the same business day with a time and a price.

No obligation. The price is quoted before any work. Your details go only to our Winnipeg team.

Broken appliance? Let's get it running.

Same-day service across Winnipeg. Straight pricing, quoted before any work.

Call nowGet a quoteRepair or replace?