Home / LG Oven Repair in Winnipeg

LG Oven Repair in Winnipeg

Reviewed November 2026 · Winnipeg, Manitoba

$150 to $350main control board $250 to $450
Same-daymost Winnipeg calls
Best forcold oven, F6 / F9 / F19 heating codes, stuck door lock

LG oven repair in Winnipeg usually costs $150 to $350: a bake element on an electric range is $160 to $320, an oven igniter on a gas range $180 to $350 and a temperature sensor $150 to $280. The main control board that drives the display is the dear part at $250 to $450, and a cracked glass top is priced on your model. The diagnostic visit is $90 to $130 and is credited to the repair. The useful thing about LG is that the oven tells you which part is wrong before a technician arrives: LG ranges throw numbered F codes, and reading the number off the display saves a second trip. We work on every LG range and wall oven sold in Canada, electric and gas, same-day or next-day across Winnipeg, with the price settled before anything is opened. Not an LG? Start at stove and oven repair Winnipeg; every part is priced out on oven repair cost Winnipeg.

(431) 441-3572

Need it today? Call

(431) 441-3572

We book a real arrival window across Winnipeg, diagnose the fault, and quote a firm price before any work.

  • Same-day & next-day service
  • Firm price before any work
  • Service call credited to the repair
  • All major brands, one-visit repairs
Call (431) 441-3572

Winnipeg & surrounding area

Book a repair

Tell us what’s broken and we’ll come back the same business day with a time and a price.

No obligation. The price is quoted before any work. Your details go only to our Winnipeg team.

Read the F code first

On an LG range the display is the diagnosis. LG publishes the full list on its range error-code page, and the codes point at a specific part, which is what tells us whether a call is a one-trip fix or a board order. Write the number down, letter for letter, before you touch anything.

LG code What LG says it is What it usually means for the repair
F1, F2 Upper oven thermistor error The oven temperature sensor; a stocked part
F3 Touch pad sensor key error A button reading as stuck, often the membrane or control
F6 Upper oven heating error The oven is not reaching heat; element or relay
F7, F17 Convection fan error The convection fan motor or its connection
F9 Upper oven is not heating properly The classic no-heat LG oven: element or sensor
F10 Door locking system failure (upper oven) The self-clean door-lock motor or switch
F11 Communication error A wiring or board communication fault
F16 Oven sensor issue The oven sensor circuit
F19 Oven heating error Heating fault, read alongside F6 and F9
F20 Door locking system failure (lower oven) Lower-oven lock on a double oven
F27 Cooling fan stalled or locked during self clean The cooling fan jammed or failed mid self-clean

On an LG the F code narrows the part before anyone opens the range, which is exactly why photographing it is worth more than describing it. Tell us the number on the phone and the right part usually rides on the first truck.

Three LG displays that are not faults

Not everything LG shows you is a fault. Three of them, from the same LG list, cost nothing.

PF. Power has been interrupted to the range, LG's way of flagging that the breaker tripped or the power flickered. A blinking clock after a Manitoba Hydro blip is this, not a fault. Reset the clock and carry on; if the oven also will not heat after power returns, that is a separate check below.

Sb, shown as 5b. The range is in Sabbath mode, a setting that holds the oven at temperature with the display and tones muted. It is easy to switch on by accident. LG states plainly it is not an error code; turning it off is in your manual.

A cooktop "too hot" indicator. LG's list notes a cooktop reading that only means the surface is above about 150°F and too hot to touch. It is a safety readout, not a broken element. Let the top cool and it clears itself.

An LG oven that shows F6, F9 or F19 and will not come up to temperature is the most common call we take on the brand. On an electric range it is the bake element or the sensor; on a gas range it is the igniter. The checks below are where we start on each.

When an LG oven will not heat

A no-heat LG oven splits cleanly by fuel, and the display usually tells you which half you are in.

On an electric LG range, F6, F9 or F19 with a cold oven is almost always the bake element or the temperature sensor. The element is a visible coil across the oven floor; when it fails it often shows a bright spot or a break, and it is a $160 to $320 part fitted in one visit. If the element looks intact but the oven still runs cold or bakes unevenly, the sensor is next at $150 to $280. Only after both test good does the conversation move to the control board at $250 to $450, because a board is the part most often blamed and least often at fault.

On a gas LG range, a cold oven with burners that still light is the oven igniter, every time. The glow bar lights up, which fools people into thinking it works, but once it weakens it no longer draws enough current to open the oven's gas valve, so the oven never fires. It is a stocked part at $180 to $350 and is usually a single visit. What you can safely check yourself stops at three things: that the cooktop burners light, that the supply valve behind the range is open, and that nothing tripped the breaker the range's spark and controls run on.

ProBake, EasyClean and Self-Clean

Two LG features change how these ranges behave, and both come up on repair calls.

ProBake Convection puts the convection heating element at the back of the oven with a two-speed fan, which LG says gives faster preheating and more even baking across several racks. When that rear element or its fan fails you get uneven results long before a code appears, and the fault shows as F7 or F17 if the fan motor is the problem.

The two cleaning cycles are not the same, and one is far harder on the range. LG's cleaning guide describes Self-Clean as a high-heat cycle of 3, 4 or 5 hours depending on how dirty the oven is; the door locks automatically and releases only once the oven has cooled, and the racks have to come out first or they discolour. That heat is what strips door locks, thermal fuses and boards on an older range, and an F10, F20 or F27 code right after a self-clean points straight at it. EasyClean is the gentle one: water only, racks out, a short low-heat cycle, and it will not even start if the oven is still above about 150°F, showing a "Hot" readout until it cools. If you are going to clean before the holidays, read the self cleaning oven guide first and leave a week between the cycle and the meal.

What your LG is doing, and what it usually costs

What you see What it usually is Typical Winnipeg price
F6, F9 or F19, oven cold, cooktop works (electric) Bake element, then the temperature sensor $160 to $320 element; $150 to $280 sensor
Oven cold, gas burners still light Oven igniter too weak to open the gas valve $180 to $350
Bakes unevenly, multi-rack results off ProBake convection fan or element (F7 or F17) $150 to $300, fan motor quoted by model
F3, buttons dead or unresponsive Touch panel membrane or control board Quoted by model; board $250 to $450
F10 or F20, door stuck locked after self-clean Door lock motor or switch Quoted by model
One glass-top zone dead Radiant element or its switch $150 to $300
Display dark, clock gone, oven dead Half-tripped 240V breaker, then the control board Nothing for the breaker; $250 to $450 for a board
Cracked or shattered glass top Replacement glass assembly Quoted on your model

LG oven repair prices in Winnipeg

Part Typical price, parts and labour
Bake or broil element (electric) $160 to $320
Oven igniter (gas) $180 to $350
Temperature sensor or thermistor $150 to $280
Radiant element or receptacle $150 to $300
Convection fan motor $150 to $300
Main control board $250 to $450
Door lock, door hinge, glass top Quoted on your model before any work

These are the same ranges published across this site for every brand, because an element, an igniter and a sensor cost about the same whoever built the range. Where LG sits high is the main board on ProBake and Wi-Fi models, the dearest control we fit. The $90 to $130 diagnostic call is credited when you go ahead, so the visit is never paid for twice. Prices for the rest of the house are on appliance repair cost in Winnipeg.

The warranty check, and the gas rule

Before you pay for a part, check coverage. LG's warranty in Canada is one year of parts and labour on the range from the date of purchase; if your oven is inside that first year, a warranty call to LG comes before a call to us, so have your proof of purchase handy and confirm the term against your model's manual.

If yours is a gas LG range and you ever smell gas, stop and treat it as an emergency. Manitoba Hydro's natural gas safety page says to get people and pets out, leave the doors open behind you, call 911 or Manitoba Hydro at 1-888-624-9376 from a safe place, and stay at least 100 metres away until you are told it is safe. The same page asks you to have gas appliances serviced at least once a year and to watch the flame: it should burn blue, and a yellow flame can be a sign of carbon monoxide.

Repair it or replace it

Electric ranges last about 13 years and gas ranges about 15 in the NAHB component-life study our cost page cites, and most LG oven faults are a small fraction of a new range. The call comes down to the part and the age:

Range age Element, igniter, sensor or fan ($150 to $350) Control board ($250 to $450) or a glass top
Under 8 years Repair Repair
8 to 12 years Repair Usually repair; ask for the comparison
13 years or more Repair if the range is otherwise sound Compare against a new range before spending

We repair ranges and do not sell them, so when we say replace it is because the arithmetic says so. The repair-or-replace calculator shows that arithmetic with your own numbers, and appliance disposal in Winnipeg covers the 4R Depots and retailer haul-away for the old range.

Before you book

  • Read the display. Note the F code, number and all. F6, F9 and F19 are heating faults; F10 and F20 are door locks; PF and Sb are not faults at all.
  • Check the breaker. An electric range runs on a double 240V breaker. If one half trips, the clock can run while the oven and elements are dead. Switch it fully off and back on.
  • Try the thermometer. If baking has gone wrong, put an oven thermometer on the middle rack at 350°F for 20 minutes. A steady large error is a sensor; a small one can be corrected in the oven's calibration menu.
  • Note the model number. It is on the oven door frame or the storage-drawer lip, and the serial is what LG asks for on a warranty call.

Other LG appliances, and other brands

An LG fridge with an Er code or a tired linear compressor is on LG refrigerator repair Winnipeg, and an LG dishwasher showing OE or LE is on LG dishwasher repair Winnipeg. The brand overview is LG appliance repair Winnipeg. Other ranges: Samsung oven repair Winnipeg, stove and oven repair Winnipeg, Whirlpool appliance repair Winnipeg and GE appliance repair Winnipeg. A built-in glass or induction top with no oven under it is on cooktop repair Winnipeg. An oven that quits the night you are hosting jumps the queue: emergency appliance repair Winnipeg.

Questions we get asked

How much does LG oven repair cost in Winnipeg?

Most LG oven repairs in Winnipeg cost $150 to $350, parts and labour together: a bake element $160 to $320, a gas oven igniter $180 to $350, a temperature sensor $150 to $280. The main control board is $250 to $450 and a cracked glass top is quoted by model. The $90 to $130 diagnostic call is credited to the repair.

What does F9 mean on my LG oven?

LG's own range code list calls F9 "upper oven is not heating properly." On an electric range that is usually the bake element or the temperature sensor; on a gas range a no-heat oven with working burners is the igniter. Photograph the code and we will bring the part. F6 and F19 are related heating faults read the same way.

Why is my LG oven door locked and showing F10?

F10 is LG's door locking system failure on the upper oven, and it most often appears after a self-clean cycle, when the lock motor or switch sticks with the door still latched. Do not force it. It is a priced repair once the oven has fully cooled; F20 is the same fault on the lower oven of a double.

My LG oven shows PF, is it broken?

No. PF means power was interrupted to the range, usually a tripped breaker or a power flicker. Reset the clock and it clears. If the oven will not heat after power is back, that is a separate heating fault, not the PF message.

Can I fix an LG oven that will not heat myself?

You can safely confirm the breaker is on, and on a gas range that the other burners light and the supply valve is open. Replacing an element, igniter, sensor or board involves the 240V supply or the gas valve and belongs to a technician. Tell us the F code and most of these are one visit.

Is it worth fixing a 12 year old LG range?

For an element, igniter, sensor or convection fan, yes; those cost a fraction of a new range, and ranges last about 13 to 15 years. For a $250 to $450 board or a glass top on a range that age with other wear, compare against a new one first, and we will tell you which way the numbers point.

Reviewed November 2026.

(431) 441-3572

Need it today? Call

(431) 441-3572

We book a real arrival window across Winnipeg, diagnose the fault, and quote a firm price before any work.

  • Same-day & next-day service
  • Firm price before any work
  • Service call credited to the repair
  • All major brands, one-visit repairs
Call (431) 441-3572

Winnipeg & surrounding area

Book a repair

Tell us what’s broken and we’ll come back the same business day with a time and a price.

No obligation. The price is quoted before any work. Your details go only to our Winnipeg team.

Broken appliance? Let's get it running.

Same-day service across Winnipeg. Straight pricing, quoted before any work.

Call nowGet a quoteRepair or replace?