Home / Samsung Dishwasher Repair in Winnipeg

Samsung Dishwasher Repair in Winnipeg

Reviewed October 2026 · Winnipeg, Manitoba

$150 to $400most Samsung dishwasher repairs
Same-daymost Winnipeg calls
Best forLC, 5C, 4C, HE codes

Samsung dishwasher repair in Winnipeg usually costs $150 to $400 in parts and labour, and the code on the display tells you where the money is going. LC means the leak sensor has found water in the base, 5C means it cannot drain, 4C means it is not getting water, and HE or tE points at the temperature reading. Plenty of these clear with a filter rinse or a valve under the sink. When a part is needed, a latch, valve or drain pump sits at the low end and a wash pump or control board at the top. We come out same-day or next-day across Winnipeg, any Samsung model, Waterwall and StormWash included, and the price is agreed before a panel comes off. Other makes are on dishwasher repair Winnipeg.

(431) 441-3572

Need it today? Call

(431) 441-3572

We book a real arrival window across Winnipeg, diagnose the fault, and quote a firm price before any work.

  • Same-day & next-day service
  • Firm price before any work
  • Service call credited to the repair
  • All major brands, one-visit repairs
Call (431) 441-3572

Winnipeg & surrounding area

Book a repair

Tell us what’s broken and we’ll come back the same business day with a time and a price.

No obligation. The price is quoted before any work. Your details go only to our Winnipeg team.

Read the code first: what a Samsung dishwasher is telling you

Samsung publishes its dishwasher codes on its own support page for dishwasher error codes. Models without a digital display flash lights in a pattern instead. Samsung's advice is to troubleshoot before you clear a code, because a code you reset without fixing the cause comes straight back. That matches what we see on Winnipeg calls.

Code on the display What Samsung says it means Where it usually ends up
LC or LE The leak sensor in the base has detected moisture A seal, hose joint or over-sudsing; $150 to $300 depending on the source
5C, 5E, SC or SE The dishwasher cannot drain Free if it is the filter or hose; $180 to $350 for a drain pump
4C or 4E Water is not arriving at the pressure or temperature it needs Free if it is the shut-off valve; $160 to $300 for an inlet valve
OC, 0C or oE More water in the tub than there should be Usually the inlet valve, $160 to $300
HE or tE The temperature inside is being read incorrectly Temperature sensor, $150 to $280
HC Too hot inside the tub Quoted after testing the heater and sensor
3C The pump has failed Wash pump, $220 to $400
7E The Waterwall reflector cannot move properly Often a utensil in the track; quoted by model if the motor has failed
bE or 6E The panel thinks a button is stuck Control panel or touchpad, $200 to $400
CE The control panel cannot talk to the rest of the machine Wiring or a board, $200 to $400
PC Zone Wash is not working correctly Quoted by model

Two things on the display are not faults. AP means the dishwasher is in Wi-Fi pairing mode; switching it off and back on clears it. A rinse aid light just means the dispenser is empty.

LC: the leak code, and why it keeps the drain pump running

LC is the Samsung dishwasher call we take most. When the sensor in the base pan feels water, the dishwasher stops washing and runs its drain pump to protect your floor, which is why an LC machine often hums away with nothing happening in the tub. Samsung's own instruction for a persistent leak code is to close the water supply and switch the dishwasher off at the breaker, and that is the right first move in a Winnipeg kitchen too, especially over a finished basement.

What usually puts water in that pan:

  • Too many suds. A squirt of hand dish soap, or a rinse aid dispenser that was overfilled and spilled, foams up and pushes water past the door seal. This is the cheapest LC there is: run an empty rinse cycle and let the base dry out.
  • The door gasket or lower door seal. A cracked or flattened seal lets water track down the front edge.
  • A loose joint under the tub. The inlet connection, the drain hose clamp or the sump seal. These leak slowly, so the floor stays dry and only the sensor knows.
  • On Waterwall models, a blocked reflector. Samsung specifically lists a blocked reflector as something to check with LC on Waterwall machines, because a jammed reflector sprays water where it was never meant to go.

The pan has to dry before the sensor will reset, which can take a day on its own. Tilting the machine to drain it is not something we recommend doing yourself, because it is easy to crack the drain hose or pull a supply line. We find the source, fix it, then dry the pan, in that order.

5C: the Samsung that will not drain

A 5C code, or standing water when you open the door, is the second most common Samsung dishwasher problem. Most of the fix is free:

  1. Twist out and wash the filter. Samsung uses a cylinder filter with a fine mesh under it in the floor of the tub. Rinse both and brush the mesh. On a Waterwall model a clogged fine filter is also what triggers some IE codes, so this one check covers two problems.
  2. Check the drain hose under the sink. It needs a high loop up under the counter before it drops to the drain. A hose that sags or is crushed by bins in the cabinet slows the drain enough to trip 5C.
  3. Run the garburator. Food in the garburator blocks the dishwasher outlet. A brand-new garburator may still have its knockout plug in the dishwasher inlet.
  4. Listen. Cancel a cycle so the dishwasher tries to drain. A hum with no water moving is a jammed or failed pump. Silence points at the pump or the control.

If the filter and hose are clear and 5C returns, the drain pump is the usual part, $180 to $350 installed. The full set of free checks for any brand is on dishwasher not draining.

4C in a Winnipeg winter: water that is too cold, too slow or not there

Samsung's Canadian water supply requirements ask for hot water between 49°C and 65°C at a pressure of 20 to 120 psi, and Samsung notes that pressure under 20 psi can lead to inlet valve failure. A 4C means the machine did not get that.

In Winnipeg, three causes cover most 4C calls:

  • The shut-off under the sink is part-closed. Someone turned it while fixing the tap, or a renovation left it half open. Opening it fully is free.
  • A frozen or slow supply line. Samsung lists a frozen inlet line as a cause of 4C. A dishwasher on an outside wall, or with its supply run through an unheated crawlspace or a cold bulkhead, is the one that throws 4C in the first deep cold snap of the season. Let the kitchen tap run hot first, and if the line itself has frozen, do not heat it with an open flame.
  • A failing inlet valve. The screen inside it clogs, or the coil gives out. That is a $160 to $300 repair.

A valve that will not close all the way causes the opposite code, OC, because water keeps coming in. Same part, same price.

Waterwall, StormWash and AutoRelease: the Samsung designs that behave differently

Samsung dishwashers are not all built the same way, and the design matters when something stops working.

Waterwall models use a fixed spray bar and a moving reflector that travels along the back of the tub, instead of a lower spray arm. When the reflector stops in one place you get one clean stripe and dirty dishes everywhere else, or a 7E code. Usually something has dropped into the track: a cutlery handle, a broken glass, a lid. Clear the track with the machine off. If it is clear and the reflector still will not move, the reflector motor or its belt is the part.

StormWash and rotary-arm models clean like most dishwashers, with arms that spin. Dirty dishes there usually mean blocked jets or a weak wash pump. Pull the arms, rinse them and clear the holes. If the arms are clean and the water barely moves, that is the pump, $220 to $400.

AutoRelease dry opens the door a crack at the end of the cycle to let steam out. A door that pops open is doing its job. A door that will not latch shut at the start, so the machine refuses to run, is a door latch, $150 to $280.

Samsung dishwasher repair costs in Winnipeg

A Samsung costs what any dishwasher costs to fix here. The part sets the price, not the badge.

Samsung dishwasher repair Typical range
Door latch or door switch $150 to $280
Door gasket or lower door seal $150 to $280
Water inlet valve (4C, OC) $160 to $300
Drain pump (5C) $180 to $350
Temperature sensor (HE, tE) $150 to $280
Wash or circulation pump (3C) $220 to $400
Control board or touchpad (bE, CE) $200 to $400

The diagnostic call is typically $90 to $130, and it is credited to the repair if you go ahead. Every dishwasher part and problem, any brand, is priced on dishwasher repair cost Winnipeg.

Is a Samsung dishwasher worth repairing?

Most dishwashers last 8 to 10 years. On a Samsung inside that window, a latch, valve, seal, sensor or drain pump is an easy yes, because the repair is a fraction of a new machine at around $800. The closer call is a wash pump or a control board on a Samsung past eight years, since those sit at the top of the range. If the tub, racks and door are solid, repairing usually still pays. If the racks are rusting and the gasket is cracking at the same time, it usually does not. You get the figure and an honest opinion before anything is ordered, and the repair-or-replace calculator runs the same arithmetic on your numbers. For the rest of the Samsung appliances in your home, see Samsung appliance repair Winnipeg.

What Winnipeg water and winters do to a Samsung dishwasher

  • Scale, slowly. The City of Winnipeg's published distribution-system test results show total hardness averaging 82 mg/L as calcium carbonate, with a range of 76 to 90. That is moderate. It narrows spray jets and coats a heater over years rather than months, so it is a maintenance item, not the reason a two-year-old machine fails. A monthly cleaning cycle with a dishwasher cleaner keeps it in check.
  • Cold fill in January. The colder the water reaching the machine, the longer the heater works and the longer the cycle runs. Running the tap hot before you start shortens it.
  • Basement kitchens and suites. A secondary suite dishwasher that drains a long way to a stack, or into a laundry tub, is more likely to throw 5C. The fix is often the hose route, not the pump.

Before you book

  • Write down the code and whether any lights are flashing.
  • Rinse the filter and check the lower spray arm or the Waterwall reflector moves freely.
  • Open the shut-off under the sink fully if the code is 4C.
  • Raise the drain hose into a high loop if the code is 5C.
  • Find the model number. On most Samsung dishwashers it is on a label on the side or top edge of the door. It starts with DW.
  • Check for recalls by searching your model on Health Canada's Recalls and Safety Alerts site.

Questions we get asked

How much does Samsung dishwasher repair cost in Winnipeg?

Most Samsung dishwasher repairs in Winnipeg run $150 to $400 in parts and labour. A latch, seal, inlet valve, sensor or drain pump is at the low end, and a wash pump or control board at the top. The $90 to $130 diagnostic call is credited when you go ahead.

What does LC mean on a Samsung dishwasher?

The leak sensor in the base pan has detected water, so the dishwasher stops washing and runs the drain pump. Suds from the wrong soap, a door seal or a loose hose joint are the usual causes. Turn off the water and the breaker, and have the source found before the pan is dried and the sensor resets.

How do I fix a 5C code on my Samsung dishwasher?

Clean the filter in the tub floor, make sure the drain hose under the sink loops up high and is not crushed, and run the garburator if you have one. If 5C still comes back, the drain pump is the likely part, usually $180 to $350.

Why does my Samsung dishwasher show 4C?

It is not getting water at the pressure or temperature it needs. Check the shut-off valve under the sink is fully open. In a Winnipeg cold snap, a supply line on an outside wall can freeze. If the water supply is fine, the inlet valve is usually the problem.

Why are the dishes still dirty on my Samsung Waterwall dishwasher?

The reflector that sweeps water across the tub has usually stopped moving, often because a utensil has fallen into its track. Clear the track with the power off. If the reflector still will not travel, the reflector motor or belt needs replacing.

Can I just reset a Samsung dishwasher error code?

Turning the breaker off for about 30 seconds will clear the display, but Samsung itself says to fix the cause first, because the code returns if you do not. A reset is useful after you have cleaned the filter or opened a valve, not instead of it.

Are you Samsung's factory service?

No. We are an independent repair service and are not affiliated with Samsung. If your dishwasher is still under Samsung's warranty, contact Samsung first so the coverage is not affected; once it is out of warranty, we are usually the quicker way to get it fixed.

Reviewed October 2026.

(431) 441-3572

Need it today? Call

(431) 441-3572

We book a real arrival window across Winnipeg, diagnose the fault, and quote a firm price before any work.

  • Same-day & next-day service
  • Firm price before any work
  • Service call credited to the repair
  • All major brands, one-visit repairs
Call (431) 441-3572

Winnipeg & surrounding area

Book a repair

Tell us what’s broken and we’ll come back the same business day with a time and a price.

No obligation. The price is quoted before any work. Your details go only to our Winnipeg team.

Broken appliance? Let's get it running.

Same-day service across Winnipeg. Straight pricing, quoted before any work.

Call nowGet a quoteRepair or replace?