Oven repair in Winnipeg usually costs $150 to $350 in parts and labour. A bake or broil element is $160 to $320, a gas oven igniter $180 to $350 and a temperature sensor $150 to $280. A failed control board is the expensive one at $250 to $450. Stovetop faults (an element, a burner switch or an igniter) run $150 to $320. The diagnostic call is $90 to $130 and is credited to the repair when you go ahead, so the visit is not paid for twice. To book instead of price, go to stove and oven repair Winnipeg; glass, induction and built-in tops are priced on cooktop repair Winnipeg.
Need it today? Call
(431) 441-3572We book a real arrival window across Winnipeg, diagnose the fault, and quote a firm price before any work.
- Same-day & next-day service
- Firm price before any work
- Service call credited to the repair
- All major brands, one-visit repairs
Winnipeg & surrounding area
Book a repair
Tell us what’s broken and we’ll come back the same business day with a time and a price.
Oven and stove repair prices by part
These are the same ranges published everywhere else on this site, parts and labour together, so any quote you get can be checked against them. Where a part has no published range, it is quoted on your model before any work, never guessed.
| Part | Typical Winnipeg price | What you notice when it fails |
|---|---|---|
| Bake or broil element (electric) | $160 to $320 | Oven stays cold, or only the top or bottom heats; often a visible split or blister on the coil |
| Oven igniter (gas) | $180 to $350 | Stovetop lights, oven never does; the igniter glows but the burner does not catch |
| Temperature sensor | $150 to $280 | Food burns or comes out raw at the set temperature; preheat takes far too long |
| Surface element or receptacle | $150 to $300 | One coil or one glass-top zone dead, or stuck on high |
| Surface burner switch or igniter (gas) | $150 to $320 | A burner clicks and never lights, or keeps clicking after it lights |
| Control board | $250 to $450 | Blank or flickering display, keys that do nothing, error codes, relays clicking |
| Touch control or induction power board (cooktop) | $250 to $450 | Zones dropping out together, touch keys dead |
| Door lock, door hinge, cracked glass top, convection fan | Quoted by model | Door stuck locked after self-clean, door that will not close, cracked glass, noisy fan |
Most oven calls in Winnipeg land in the $150 to $350 band. The board is the one repair that changes the conversation, and even then we test the cheaper parts first, because a bad sensor or a loose connector can make a good board look dead.
What it costs by problem
You do not call about a part. You call because supper is not cooking. This is how the usual complaints price out once the fault is found:
| What the oven or stove is doing | Most likely cause | Typical cost |
|---|---|---|
| Electric oven not heating at all | Bake element; less often a relay on the board or the breaker | Free if it is the breaker; $160 to $320 for an element |
| Gas oven not heating, burners fine | Oven igniter too weak to open the gas valve | $180 to $350 |
| Oven runs hot or cold | Temperature sensor, or a control that has drifted and needs recalibrating | Free if calibration fixes it; $150 to $280 for a sensor |
| Broil works, bake does not (or the reverse) | One element, or one relay on the board | $160 to $320, or $250 to $450 for a board |
| Display blank, oven dead, clock gone | Half-tripped 240V breaker, then the control board | Free for the breaker; $250 to $450 for a board |
| Oven dead after running self-clean | A thermal fuse, the door lock, or the control board | Fuse and lock quoted by model; $250 to $450 for a board |
| One burner or zone not working | Surface element, receptacle or infinite switch | $150 to $300 |
| Gas burner clicks and will not light | Wet or dirty igniter, cap off its seat, or the spark switch | Free if cleaning fixes it; $150 to $320 for a part |
A cold gas oven with a working stovetop is the single most common oven call we get. The igniter still glows, so it looks fine, but it no longer draws enough current to open the oven's gas valve. It is a standard part and usually done in one visit.
Gas or electric: why the bill is about the same
People expect gas to cost more. In practice the fuel changes which part fails more than it changes the price. An electric oven's weak point is the bake element on the floor of the oven, which you can usually see has failed. A gas oven's weak point is the igniter, hidden under the oven floor panel. Both fall in the same $160 to $350 window.
Where gas does cost you more is in the free checks you cannot do. On an electric range you can reset a breaker or look at an element yourself. On a gas range, anything past checking that the other burners light, that the supply valve is open and that the burner caps are seated belongs to a technician. Converting a range between natural gas and propane is a job for a licensed gas fitter, which is why we tell cottage and rural callers so on the phone.
If you smell gas, do not try to find the leak. Manitoba Hydro's natural gas safety page says to get people and pets out, avoid anything that could make a spark, and call 911 or Manitoba Hydro at 1-888-624-9376 from a safe place. Book the repair after that.
The self-clean bill, and why it arrives in December
The self-clean cycle is the most expensive button on most ranges. GE's own cleaning guide puts the cycle at about 880°F for one and a half to three hours, and LG's self-clean preparation page lists cycles of 3, 4 or 5 hours with the door locking automatically. That is far hotter and longer than any roast. An older oven that has been fine for years can lose a thermal fuse, a door lock motor or the control board to that heat, and the usual timing is the week before a big holiday meal, when everyone cleans the oven at once.
What that does to the bill:
- Thermal fuse. The cheapest outcome. The oven goes completely dead because a safety fuse did its job. Quoted by model, usually the low end of a visit.
- Door stuck locked. The lock motor or its switch has failed with the door shut. Quoted by model. Do not force the door; LG's page says the same.
- Control board. The costly outcome, $250 to $450, and the one that can tip an older range toward replacement.
If your range is past about ten years old, the cheapest repair is the one you avoid: clean by hand or use a short steam-clean option if your oven has one, and book any repair at least a week before you host. The full set of manufacturer rules, the by-hand method and the steam-clean steps are in our self cleaning oven guide. GE describes Steam Clean as a roughly 30-minute cycle at lower temperatures than self-clean.
What pushes a quote up or down
The part decides most of the price, but a few things move it within the range:
- Range or wall oven. A freestanding range slides out from the wall. A built-in wall oven or a double wall oven may need to come out of the cabinet to reach the part, which adds labour.
- Coil, glass or induction on top. Coil elements are the cheapest surface fix. Glass-top radiant elements and induction boards sit higher, and a cracked glass top is priced by model.
- Age and part supply. Common elements and igniters are on the truck. Boards for older or less common models may have to be ordered and fitted on a quick return trip.
- How much you tell us. Brand, model number and what the oven is doing let the likely part come on the first trip. The model label is usually on the frame behind the oven door, the storage drawer, or the back of the range.
Is it worth fixing an oven?
Usually, yes. Ranges and ovens last about 13 to 15 years, longer than most appliances, and an element, igniter or sensor costs a small share of a new range. The honest test is age plus the part:
| Range age | Element, igniter, sensor or surface part ($150 to $350) | Control board ($250 to $450) |
|---|---|---|
| Under 8 years | Repair | Repair |
| 8 to 12 years | Repair | Usually repair; ask us for the comparison |
| 13 years or more | Repair if the oven is otherwise sound | Often replace, especially with rust, chipped enamel or other faults |
A board on an old range is the case where we will tell you to compare against a new one before you spend the money. We repair ranges and do not sell them, so that answer does not depend on what we would earn. If you do replace it, appliance disposal in Winnipeg covers the 4R Depots and retailer haul-away for the old one.
Free checks before you pay for a visit
- Breaker. An electric range runs on a 240V double breaker. If one half trips, the clock and light can still work while the oven and two elements are dead. Switch it fully off and back on.
- Control lock and modes. Many ranges have a control lock, a Sabbath mode or a demo mode that makes the oven ignore you. Check the manual for how to cancel it before booking.
- Thermometer test. If baking has gone wrong, put an oven thermometer on the middle rack, set 350°F and wait 20 minutes. Ovens cycle above and below the set point, so read it a few times. A small error can often be corrected in the oven's own calibration setting.
- Gas burners. Lift the cap, make sure it sits flat, and let a burner that got wet from a boil-over dry out for a day before calling.
- Oven igniter. On a gas oven, look through the broiler or floor vent after setting bake. Glowing with no flame after a minute or so points at the igniter; no glow at all points elsewhere. Then stop and call.
Gas ranges in a Winnipeg winter
When it is minus 30, someone always asks whether leaving the oven door open helps heat the kitchen. It does not, and with gas it is dangerous. Natural Resources Canada's guidance on combustion gases in your home says never to use an unvented natural gas cooking appliance as a space heater because of the real risk of carbon monoxide poisoning, and to run an outdoor-vented range hood while a gas range is on, since recirculating hoods do not remove combustion products.
Two more things worth doing if you cook with gas. Health Canada advises at least one carbon monoxide alarm with battery backup in homes with fuel-burning appliances, most importantly in the hallway outside the bedrooms. And Manitoba Hydro notes that burner flames should be blue; a lazy yellow flame can be a sign of carbon monoxide, which is a reason to call, not to keep cooking. A dead oven the night before you host is the kind of call that jumps the queue; see emergency appliance repair Winnipeg.
Renting? Check who pays first
In a Manitoba rental, an oven that came with the unit and failed through normal use is generally the landlord's repair, not the tenant's. The details, including what a tenant can do when a landlord does not act, are on landlord and tenant appliance repair in Winnipeg.
Brand notes that change the price
Brand matters less for ovens than for fridges or washers, because elements, igniters and sensors are similar across makers. It matters most for boards and touch controls. Samsung and LG ranges with large displays and Wi-Fi boards sit at the top of the board range (Samsung's codes and model prefixes are on Samsung oven repair Winnipeg, LG's numbered F codes on LG oven repair Winnipeg, and Whirlpool's F and E pairs on Whirlpool oven repair Winnipeg); older Whirlpool, GE and Frigidaire coil ranges are among the cheapest to keep running. Brand-specific faults are on Samsung appliance repair Winnipeg, LG appliance repair Winnipeg, Whirlpool appliance repair Winnipeg and GE appliance repair Winnipeg. For every other appliance in the house, the full price list is on appliance repair cost in Winnipeg.
Questions we get asked
How much does oven repair cost in Winnipeg?
Most oven repairs in Winnipeg cost $150 to $350 in parts and labour: a bake or broil element, a gas igniter or a temperature sensor. A control board is $250 to $450. The $90 to $130 diagnostic call is credited when you go ahead with the repair.
How much does stove repair cost?
Stovetop repairs, such as a coil or glass-top element, an infinite switch, or a gas burner igniter or switch, usually cost $150 to $320. Touch controls and induction boards are $250 to $450, and a cracked glass top is quoted by model.
How much does it cost to replace an oven igniter?
A gas oven igniter is typically $180 to $350 in Winnipeg, parts and labour together. It is the most common gas oven repair, and the clue is a stovetop that lights while the oven stays cold.
Is it worth repairing a 15 year old oven?
Often, if it needs an element, igniter or sensor and is otherwise sound, since those cost a small share of a new range. If a range that old needs a $250 to $450 control board and has other wear, replacing it usually makes more sense.
Why did my oven stop working after self-clean?
Self-clean runs at about 880°F for hours, and on an older oven that heat can blow a thermal fuse, jam the door lock or damage the control board. The fuse is the cheap outcome; a board is $250 to $450.
Do you charge to diagnose an oven?
Yes, a diagnostic call of about $90 to $130 covers the trip and finding the fault. It is credited to the repair if you approve it, so you do not pay for the visit twice.
Is gas stove repair more expensive than electric?
Not usually. Gas igniters and electric elements fall in the same $160 to $350 window. The difference is that on a gas range most checks past the burner caps and the supply valve belong to a technician.
Reviewed October 2026.
Need it today? Call
(431) 441-3572We book a real arrival window across Winnipeg, diagnose the fault, and quote a firm price before any work.
- Same-day & next-day service
- Firm price before any work
- Service call credited to the repair
- All major brands, one-visit repairs
Winnipeg & surrounding area
Book a repair
Tell us what’s broken and we’ll come back the same business day with a time and a price.